Products

online color measurement detector

This detector is based on the national standard GB11903-89 “Measurement of water quality color”, with potassium chlorplac and cobalt chloride to prepare the color standard solution, at a specific wavelength, the absorbance of water quality color in line with Bill’s law, by calculating the color value of the sample.

JAMES@MADSURGROUP.COM

Instrument principle

instrument parameter

Test method: the determination of water quality color degree

Detection range: (0~1000) degree, extensible

Accuracy: ± 5%

Zero-point drift: ± 5% F.S

Reproatability: ± 5%

Range drift: ± 5% F.S

Measuring period: (30~ 50) min

Communication interface: RS485 / RS232, (4~20) mA

Controller parameters

Model	MDS-KP500
Display	4.3 inches, 480*800 resolution, 262K color, IPS screen, wide viewing Angle, with backlight
	Capacitive touch screen with three protection processes (moisture-proof, mildew proof, salt spray proof)
Display size	95.0mm*53.9mm
Measuring range	-99999.0000~99999.0000
Password Protection	The default password is 0000
Compatible sensor	Digital sensor
Mounting method	Disk mounting (with chassis), wall-mounted mounting
Alarm relay	2 relays can set high and low alarm
Current output	2 isolated 4-20mA, maximum load 750Q, can be set
Communication port	RS485 Modbus RTU
Memory backup	All user Settings are stored indefinitely in EERPOM
historical data	The storage capacity of 8000 points is recorded at a 5-minute interval
Operating environment	-10~+50℃,0~95% relative humidity, no condensation
Storage environment	-20 to +70 ° C,0 to 95% relative humidity, non-condensing
The power supply	12V±10%
Power consumption of the instrument	less than 6W
Instrument size	144X145X85(mm)
Protection class	IP65