Products
online copper detector
Copper ion selective electrode, with the advantages of simple measurement, fast and accurate response, can be used with PH meter, ionometer and on-line copper ion analyzer, and can also be used in the ion selective electrode detector of electrolyte analyzer and flow injection analyzer.The selective electrode of the online copper detector is an effective method to measure the content of copper ions in samples. Copper ion-selective electrodes are also often used in on-line instruments, such as industrial on-line copper ion content monitoring.
JAMES@MADSURGROUP.COM
The selective electrode of the online copper detector is an effective method to measure the content of copper ions in samples. Copper ion-selective electrodes are also often used in on-line instruments, such as industrial on-line copper ion content monitoring.
Copper ion selective electrode, with the advantages of simple measurement, fast and accurate response, can be used with PH meter, ionometer and on-line copper ion analyzer, and can also be used in the ion selective electrode detector of electrolyte analyzer and flow injection analyzer.
| specification： | |
| measuring range | 0.064…6400ppm |
| pH range | 2…6pH |
| resolution ratio | 0.001 ppm |
| measurement accuracy | ±5%FS |
| TEMP measuring range | 0…60℃ |
| slope | 56±4mV(25℃) |
| sensing element | solid membrane |
| reproducibility | ±4% |
| membrane resistance | ＜50MΩ |
| output | 4…20 mA（Adjustable/three-wire system） |
| Current Accuracy | 1%FS |
| output load | ＜750Ω |
| data communication | Rs485(MODBUS-RTU) |
Controller parameters
| Model | MDS-KP500 |
| Display | 4.3 inches, 480*800 resolution, 262K color, IPS screen, wide viewing Angle, with backlight |
| Capacitive touch screen with three protection processes (moisture-proof, mildew proof, salt spray proof) | |
| Display size | 95.0mm*53.9mm |
| Measuring range | -99999.0000~99999.0000 |
| Password Protection | The default password is 0000 |
| Compatible sensor | Digital sensor |
| Mounting method | Disk mounting (with chassis), wall-mounted mounting |
| Alarm relay | 2 relays can set high and low alarm |
| Current output | 2 isolated 4-20mA, maximum load 750Q, can be set |
| Communication port | RS485 Modbus RTU |
| Memory backup | All user Settings are stored indefinitely in EERPOM |
| historical data | The storage capacity of 8000 points is recorded at a 5-minute interval |
| Operating environment | -10~+50℃,0~95% relative humidity, no condensation |
| Storage environment | -20 to +70 ° C,0 to 95% relative humidity, non-condensing |
| The power supply | 12V±10% |
| Power consumption of the instrument | less than 6W |
| Instrument size | 144X145X85(mm) |
| Protection class | IP65 |
TEL